Epson WorkForce Pro WF-C5710DWF review: A big MFP at a small price

This printer boasts an impressive range of features, good print quality and low running costs

IT Pro Recommended
Price
£243
  • Great value
  • Excellent colour output
  • Fast scanning
  • High-quality prints are slower-speed

The old wisdom would have you believe that only laser printers are suitable for business use. That hasn’t been true for many years, though – and Epson’s WorkForce Pro WF-C5710DWF makes a compelling argument for inkjets in the workplace. Along with a low acquisition cost, this small-footprint MFP offers a speedy 24ppm print rate, every imaginable connection option and laser-busting running costs.

That’s down to Epson’s replaceable ink pack system, which delivers mono pages for just 1.1p and colour for 4.8p. Notably, that works out the same whether you opt for the 3,000-page or 5,000-page capacity refills, so you can choose whichever you find more convenient.

While the WF-C5710DWF is a great-value MFP, it doesn’t skimp on features. It serves up print, copy, scan and fax functions, and supports direct USB connections plus both wired and wireless networking, NFC, AirPrint and Wi-Fi Direct. Despite the compact design, it can handle big workloads: although the standard paper tray has an unremarkable 250-sheet capacity, that can be tripled with the addition of a 500-page feeder tray that fits underneath the base.

The setup process went smoothly for us. Epson’s software installer for Windows automatically located the MFP on our network, updated the firmware and loaded the appropriate drivers ready for action. The rest of the software bundle includes a network status monitor, fax software, browser plugin and Epson’s Scan 2 and Document Capture Pro scan-management tools. These offer plenty of remote scan controls, and can be used to create and save scan job definitions for fast one-click access. The iPrint iOS and Android apps, meanwhile, provide plenty of remote print and scan tools for mobile users.

With all this installed, the routine passed us over to Epson’s Connect cloud portal, where we registered the MFP and set up a custom email address to which users could send attachments for printing. Off-site users can alternatively install a remote print driver, which lets them print directly over the internet. 

The cloud portal is also where you set up Epson’s scan-to-cloud service. There’s very little to this process: once we’d entered our Dropbox credentials, the service immediately appeared in the printer’s big touchscreen panel as a scan destination.

Print performance is as fast as Epson claims – but only at standard quality. In this mode, our 24-page Word document printed in precisely 60 seconds, but switching to high quality sent speeds tumbling to 6.4ppm. It was the same story with our 24-page colour DTP document, which averaged 24ppm in standard mode but just 5.3ppm at high quality.

Another potential grumble is that the print head carriage and paper handling mechanisms are somewhat on the noisy side: we measured a peak of 69dB from one metre away when printing in standard mode. That applies to copying too, which means the WF-C5710DWF isn’t ideal for a small, quiet office.

Still, we’ve no complaints about copy speed – the scanner’s duplex ADF made light work of a ten-page single-sided copy, digitising it at an average rate of 15ppm. And print quality is perfectly good for office use, with the standard print mode producing clear, dust-free text at 12pt and plenty of detail in mono photos. Moving up from cheap 75gsm paper to thicker 100gsm stock resulted in cleaner prints, but will naturally increase running costs.

Colour output is a particular strength. The WF-C5710DWF turned out bright, bold reports with no hint of banding, and it’s a great choice for photo printing: we found that snaps reproduced on 160gsm semi-gloss paper came out looking beautifully sharp and detailed with no edge bleeding.

Small businesses seeking a cloud-friendly MFP on a budget will find a lot to like about Epson’s WF-C5710DWF. It’s user-friendly and packed with features, and its running costs are far lower than you’ll get from a similarly priced laser.

Epson WorkForce Pro WF-C5710DWF specifications

Format

4,800 x 1,200dpi A4 inkjet MFP

Print speed

24ppm mono/colour

Display

10.9cm colour touchscreen

Networking

10/100 Ethernet, 802.11n wireless  

Connectivity

2 x USB 2, NFC, 33.6Kbits/sec fax/modem, 2 x RJ-11  

Print type

Duplex

Tray size

250-page input tray, 80-page MPT, 50-page duplex ADF  

Recommended monthly duty cycle

2,500 pages

Dimensions

425 x 535 x 357mm 

Weight

18.4kg

Warranty

3yr on-site warrant

Featured Resources

Navigating the new normal: A fast guide to remote working

A smooth transition will support operations for years to come

Download now

Leading the data race

The trends driving the future of data science

Download now

How to create 1:1 customer experiences at scale

Meet the technology capable of delivering the personalisation your customers crave

Download now

How to achieve daily SAP releases

Accelerate the pace of SAP change to support your digital strategy

Download now

Recommended

Lexmark cloud now allows third-party management and more
managed print services

Lexmark cloud now allows third-party management and more

22 Sep 2020
Azul 3D lands $12.5M to advance proprietary printing tech
Hardware

Azul 3D lands $12.5M to advance proprietary printing tech

24 Aug 2020
Epson WorkForce WF-110W review: Portable perfection
peripherals

Epson WorkForce WF-110W review: Portable perfection

3 Jul 2020
Picking the perfect multifunction printer
Hardware

Picking the perfect multifunction printer

4 Jun 2020

Most Popular

16 ways to speed up your laptop
Laptops

16 ways to speed up your laptop

16 Sep 2020
16 ways to speed up your laptop
Laptops

16 ways to speed up your laptop

16 Sep 2020
Windows Server flaw sparks emergency US gov warning
vulnerability

Windows Server flaw sparks emergency US gov warning

21 Sep 2020