Honor Router 3 review: Top-value Wi-Fi 6
A likeable router that performs well and delivers Wi-Fi 6 for the cheapest price we’ve seen by far
We’ve been impatiently waiting for a company to produce an affordable Wi-Fi 6 router since the first wave of releases in mid-2019 and, at last, Honor has delivered. To put its price in perspective, the next cheapest Wi-Fi 6 router we’ve seen is the £150 Netgear Nighthawk AX4, and if you want the very best speeds you need to consider the Asus RT-AX88U – a snip at £300.
Then again, the Honor’s price is reflected in its features. This is a basic dual-band router with no internal modem, while its casing is small and simple: at the front, there’s a single LED that glows various colours to show the router status, and there’s a WPS button on top for easy pairing. At the back, spaced out between the aerials, are four Gigabit Ethernet ports and a pinhole reset button, but you can forget about USB ports or even a power button.
You can set up the Router 3 using either a web browser or the Huawei AI Life app (a rare acknowledgement of Honor’s former parent brand). As soon as we launched the app, it detected the unconfigured router and invited us to connect to its Wi-Fi network. If the router isn’t connected to the internet, you’ll be prompted to either plug in your modem or set up the router in repeater mode.
While the repeater mode is great to see in such an affordable router, most people will choose the former option. Here, you’re taken to a configuration page that asks if you want to combine the 2.4GHz and 5GHz bands under a single SSID, or split them into two different networks. You’re also prompted to rename your network, set a Wi-Fi password – both WPA2 and WPA3 are simultaneously supported – and configure a strong administrative password for the router itself.
With this done, it’s straight into the management interface. The main screen shows a live bandwidth meter, along with big buttons for setting up parental controls and a guest Wi-Fi network. The controls only allow you to create rules that block internet access between specified times, but you can combine rules to create complex schedules and each device on your network can have its own settings.
The guest network is configurable too. As usual, you can give this a custom name and either leave it unsecured or apply a unique passphrase. Nice additions are the option to automatically disable the guest network after four hours, one day or never, and the ability to cap downstream bandwidth, meaning visitors can’t wreck the performance of your main network.
The traditional browser-based portal is neat, responsive and exposes a few advanced options that aren’t available in the app. These include configuring your IP and DHCP settings (oddly, the Router 3 defaults to the 192.168.3.x range), reserving addresses for specific clients, setting up port forwarding, blocking MAC addresses and enabling or disabling UPnP. You can configure the router to send all traffic over an outgoing L2TP or PPTP VPN, too. You won’t find any QoS controls, nor dynamic DNS or voice assistant integration, though.
So one burning question remains: can a sub-£80 router deliver the magic of Wi-Fi 6? We determined this by carrying out our usual series of tests, setting up the router in the living room and walking around our premises with a laptop equipped with an integrated Intel AX200 card. From four different locations, we connected to the router on the 5GHz band and measured download speeds from a NAS appliance connected to the router via Ethernet.
The Honor cruised through these tests. Even in rooms where Wi-Fi signals sometimes struggle to penetrate, it kept up an average download rate of 10.2MB/sec (equivalent to around 80Mbits/sec), which is more than three times the bandwidth that Netflix recommends for 4K HDR video streaming. This closely matches the AX4, but if you’re after the very fastest performance then you’ll need to splash out on the AX88U, which was often twice as fast.
We also tested speeds over 802.11ac and it provided a strong signal to even the remotest areas of the building, with nowhere dipping below a solid 11MB/sec download rate. It’s worth remembering, however, that this is only a dual-band design, so if you have lots of Wi-Fi 5 clients all wanting to send and receive data at once, speeds might quickly suffer. (This is less of an issue with Wi-Fi 6, which can handle multiple connections more gracefully.)
Even so, the Router 3 is fast enough for all but the most demanding roles, and should reach the extremities of an average-sized house or small office without any need for fiddly repeaters or expensive mesh arrangements. That’s an excellent result for such an unobtrusive and affordable router – and if you do need greater range, you can buy a second unit and use it as a zero-configuration extender.
In short, the Honor Router 3 is a cute little box that delivers decent wireless speeds, broad coverage and a modest speed boost for newer hardware – and does so at an almost irresistible price.
Honor Router 3 specifications
Dual-band 802.11ax 2.4GHz/5GHz Wi-Fi router
2x2 MIMO 2.4GHz radio, 2x2 MIMO 5GHz radio
4 x Gigabit Ethernet (one reserved for WAN)
4 x external antennae, WPS
242 x 152 x 41mm
Four strategies for building a hybrid workplace that works
All indications are that the future of work is hybrid, if it's not here alreadyFree webinar
The digital marketer’s guide to contextual insights and trends
How to use contextual intelligence to uncover new insights and inform strategiesFree Download
Ransomware and Microsoft 365 for business
What you need to know about reducing ransomware riskFree Download
Building a modern strategy for analytics and machine learning success
Turning into business valueFree Download